Weekly Exercises #5

library(tidyverse)     # for data cleaning and plotting
library(gardenR)       # for Lisa's garden data
library(lubridate)     # for date manipulation
library(openintro)     # for the abbr2state() function
library(palmerpenguins)# for Palmer penguin data
library(maps)          # for map data
library(ggmap)         # for mapping points on maps
library(gplots)        # for col2hex() function
library(RColorBrewer)  # for color palettes
library(sf)            # for working with spatial data
library(leaflet)       # for highly customizable mapping
library(ggthemes)      # for more themes (including theme_map())
library(plotly)        # for the ggplotly() - basic interactivity
library(gganimate)     # for adding animation layers to ggplots
library(transformr)    # for "tweening" (gganimate)
library(gifski)        # need the library for creating gifs but don't need to load each time
library(shiny)         # for creating interactive apps
theme_set(theme_minimal())

# SNCF Train data
small_trains <- read_csv("https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2019/2019-02-26/small_trains.csv") 

# Lisa's garden data
data("garden_harvest")

# Lisa's Mallorca cycling data
mallorca_bike_day7 <- read_csv("https://www.dropbox.com/s/zc6jan4ltmjtvy0/mallorca_bike_day7.csv?dl=1") %>% 
  select(1:4, speed)

# Heather Lendway's Ironman 70.3 Pan Am championships Panama data
panama_swim <- read_csv("https://raw.githubusercontent.com/llendway/gps-data/master/data/panama_swim_20160131.csv")

panama_bike <- read_csv("https://raw.githubusercontent.com/llendway/gps-data/master/data/panama_bike_20160131.csv")

panama_run <- read_csv("https://raw.githubusercontent.com/llendway/gps-data/master/data/panama_run_20160131.csv")

#COVID-19 data from the New York Times
covid19 <- read_csv("https://raw.githubusercontent.com/nytimes/covid-19-data/master/us-states.csv")

Put your homework on GitHub!

Go here or to previous homework to remind yourself how to get set up.

Once your repository is created, you should always open your project rather than just opening an .Rmd file. You can do that by either clicking on the .Rproj file in your repository folder on your computer. Or, by going to the upper right hand corner in R Studio and clicking the arrow next to where it says Project: (None). You should see your project come up in that list if you’ve used it recently. You could also go to File –> Open Project and navigate to your .Rproj file.

Instructions

• Put your name at the top of the document.

• For ALL graphs, you should include appropriate labels.

• Feel free to change the default theme, which I currently have set to theme_minimal().

• Use good coding practice. Read the short sections on good code with pipes and ggplot2. This is part of your grade!

• NEW!! With animated graphs, add eval=FALSE to the code chunk that creates the animation and saves it using anim_save(). Add another code chunk to reread the gif back into the file. See the tutorial for help.

• When you are finished with ALL the exercises, uncomment the options at the top so your document looks nicer. Don’t do it before then, or else you might miss some important warnings and messages.

Warm-up exercises from tutorial

1. Choose 2 graphs you have created for ANY assignment in this class and add interactivity using the ggplotly() function.

covid_graph <- covid19 %>%
  filter (state %in% c("Minnesota", "Wisconsin", "Iowa", "North Dakota", "South Dakota")) %>%
  group_by(date,cases)%>%
  ggplot(aes (x = date, y = cases, color = state)) + 
  geom_line() +
  labs(title= "New Covid19 cases among Five Midwest States", x= "Date")

ggplotly(covid_graph)

garden_graph <- garden_harvest %>% 
  filter(vegetable == "tomatoes") %>%
  mutate(variety = fct_reorder(variety, date, min)) %>% 
  group_by(variety) %>%
  summarize(total_harvest_lb = sum(weight*0.0022),
            min_date = min(date)) %>% 
  ggplot(aes(x = total_harvest_lb, y = fct_rev(variety))) +
  geom_col(fill = "tomato2")+
  labs(title = "Tomato Varieties Harvest Weight 
       In Order of Earliest to Latest First Harvest Date",
       y = "",
       x = "Total LBS")

ggplotly(garden_graph)

2. Use animation to tell an interesting story with the small_trains dataset that contains data from the SNCF (National Society of French Railways). These are Tidy Tuesday data! Read more about it here.

small_trains %>%
  filter(departure_station %in% c ("VANNES"))%>%
  mutate(month = factor(month.abb[month], levels = month.abb))%>%
  ggplot(aes(x = month, num_late_at_departure)) +
  geom_col() +
  transition_states(year)+
  labs(title = "Number of Late Departures from VANNES Train Station", 
       subtitle = "Year: {next_state}",
       x = "",
       y = "")
anim_save("Vannes_train.gif")

knitr::include_graphics("Vannes_train.gif")

Garden data

3. In this exercise, you will create a stacked area plot that reveals itself over time (see the geom_area() examples here). You will look at cumulative harvest of tomato varieties over time. You should do the following:

• From the garden_harvest data, filter the data to the tomatoes and find the daily harvest in pounds for each variety.
  
• Then, for each variety, find the cumulative harvest in pounds.
  
• Use the data you just made to create a static cumulative harvest area plot, with the areas filled with different colors for each vegetable and arranged (HINT: fct_reorder()) from most to least harvested (most on the bottom).
  
• Add animation to reveal the plot over date.

I have started the code for you below. The complete() function creates a row for all unique date/variety combinations. If a variety is not harvested on one of the harvest dates in the dataset, it is filled with a value of 0.

garden_harvest %>% 
  filter(vegetable == "tomatoes") %>% 
  group_by(date, variety) %>% 
  summarize(daily_harvest_lb = sum(weight)*0.00220462) %>% 
  ungroup() %>% 
  complete(variety, date, fill = list(daily_harvest_lb = 0)) %>%
  group_by(variety)%>%
  mutate(cumsum = cumsum(daily_harvest_lb))%>%
  ungroup()%>%
  mutate(variety = fct_reorder(variety, cumsum, max)) %>%
  ggplot(aes(x= date, y = cumsum, fill = variety))+
  geom_area() + 
labs(title = "Cumulative 2020 Tomato Harvest in LBS", 
     x= "", y="", fill = "")+
  transition_reveal(date)
anim_save("tomatocum.gif")

Maps, animation, and movement!

4. Map my mallorca_bike_day7 bike ride using animation! Requirements:

• Plot on a map using ggmap.
  
• Show “current” location with a red point.
• Show path up until the current point.
  
• Color the path according to elevation.
  
• Show the time in the subtitle.
  
• CHALLENGE: use the ggimage package and geom_image to add a bike image instead of a red point. You can use this image. See here for an example.
• Add something of your own! And comment on if you prefer this to the static map and why or why not.

mallorca_map <- get_stamenmap(
    bbox = c(left = 2.35, bottom = 39.4, right = 2.8, top = 39.8), 
    maptype = "terrain",
    zoom = 10)
ggmap(mallorca_map)+
  geom_path(data = mallorca_bike_day7,
            aes(x = lon, y = lat, color = ele), 
            size = .3)+
  geom_point(data = mallorca_bike_day7, aes(x= lon, y= lat), 
             color = "red", size = 1.7)+
  labs(title = "Mallorca Bike Path  ",
       subtitle = "Time:{frame_along}", 
       color = "Elevation" )+
  theme (legend.background = element_blank())+
  transition_reveal(time)
anim_save("bike_mallorca.gif")

knitr::include_graphics("bike_mallorca.gif")

I prefer the animated map over the static map because you can see the bike ride in real time. If we made the map static and used the ggplotly tool we may be able to hover over the bike ride path to see the duration of the bike ride however this animation does that for us.

5. In this exercise, you get to meet my sister, Heather! She is a proud Mac grad, currently works as a Data Scientist at 3M where she uses R everyday, and for a few years (while still holding a full-time job) she was a pro triathlete. You are going to map one of her races. The data from each discipline of the Ironman 70.3 Pan Am championships, Panama is in a separate file - panama_swim, panama_bike, and panama_run. Create a similar map to the one you created with my cycling data. You will need to make some small changes: 1. combine the files (HINT: bind_rows(), 2. make the leading dot a different color depending on the event (for an extra challenge, make it a different image using `geom_image()!), 3. CHALLENGE (optional): color by speed, which you will need to compute on your own from the data. You can read Heather’s race report here. She is also in the Macalester Athletics Hall of Fame and still has records at the pool.

heather_ironman <- bind_rows(panama_bike, panama_run, panama_swim)
tri_map <-get_stamenmap(
  bbox = c(left = -79.64, bottom = 8.89, right = -79.42, top = 9.0),
  maptype = "terrain",
  zoom = 12)

ggmap(tri_map) +
  geom_path(data = heather_ironman, 
            aes(x = lon, y = lat, color = event ), size = 1.2) +
  geom_point(data = heather_ironman, 
             aes(x = lon, y = lat, color = event), size = 3.5) +
  labs(title = "Heather's Panama Ironman Am Championships Path",
       subtitle = "Time:{frame_along}" ,
       x ="", y= "", color = "") +
  theme_map() + 
  theme(legend.background = element_blank()) +
  theme(legend.position = "bottom") +
  transition_reveal(time)
  
anim_save("heatherrace.gif")

knitr::include_graphics("heatherrace.gif")

## COVID-19 data

6. In this exercise, you are going to replicate many of the features in this visualization by Aitish Bhatia but include all US states. Requirements:

• Create a new variable that computes the number of new cases in the past week (HINT: use the lag() function you’ve used in a previous set of exercises). Replace missing values with 0’s using replace_na().
  
• Filter the data to omit rows where the cumulative case counts are less than 20.
  
• Create a static plot with cumulative cases on the x-axis and new cases in the past 7 days on the y-axis. Connect the points for each state over time. HINTS: use geom_path() and add a group aesthetic. Put the x and y axis on the log scale and make the tick labels look nice - scales::comma is one option. This plot will look pretty ugly as is.
• Animate the plot to reveal the pattern by date. Display the date as the subtitle. Add a leading point to each state’s line (geom_point()) and add the state name as a label (geom_text() - you should look at the check_overlap argument).
  
• Use the animate() function to have 200 frames in your animation and make it 30 seconds long.
• Comment on what you observe.

covid_anim <- covid19 %>%
  group_by(state) %>%
  mutate(day7_lag = lag(cases, 7, order_by = date)) %>%
  replace_na(list(day7_lag = 0)) %>%
  mutate(new_cases = cases - day7_lag) %>%
  filter(cases >= 20) %>%
  ggplot(aes(x = cases,y = new_cases, group = state))+
  geom_path(color= "grey") +
  geom_point( color = "red") +
  geom_text(aes(label = state),check_overlap = TRUE)+
  labs(title = "Cummulative Covid Cases on Log10 Scale Over Time",
       subtitle = "Time: {frame_along}",
       x = "",
       y = "") +
  scale_x_log10(label = scales::comma) +
  scale_y_log10(label = scales::comma) +
  transition_reveal(date)

animate(covid_anim, nframes = 200, duration = 30)

anim_save("covid.gif")

We can see from this graph that Covid19 cases in the US grew exponentially over time. Over time we see that States cases start to slow down. The graph isn’t the most readable, however we see how each state is doing with Covid cases in comparison to the rest of the US.

7. In this exercise you will animate a map of the US, showing how cumulative COVID-19 cases per 10,000 residents has changed over time. This is similar to exercises 11 & 12 from the previous exercises, with the added animation! So, in the end, you should have something like the static map you made there, but animated over all the days. The code below gives the population estimates for each state and loads the states_map data. Here is a list of details you should include in the plot:

• Put date in the subtitle.
  
• Because there are so many dates, you are going to only do the animation for all Fridays. So, use wday() to create a day of week variable and filter to all the Fridays.
  
• Use the animate() function to make the animation 200 frames instead of the default 100 and to pause for 10 frames on the end frame.
  
• Use group = date in aes().
  
• Comment on what you see.

census_pop_est_2018 <- read_csv("https://www.dropbox.com/s/6txwv3b4ng7pepe/us_census_2018_state_pop_est.csv?dl=1") %>% 
  separate(state, into = c("dot","state"), extra = "merge") %>% 
  select(-dot) %>% 
  mutate(state = str_to_lower(state))

states_map <- map_data("state")

USmap_anim <- covid19 %>% 
  mutate(state = str_to_lower(state)) %>% 
  left_join(census_pop_est_2018,
            by = c("state" = "state")) %>% 
  mutate(capita_state = (cases/est_pop_2018)*10000,
         weekend = wday (date, label = TRUE)) %>%
  filter (weekend == "Fri")%>%
  ggplot()+
  geom_map(map = states_map,
           aes(map_id = state,
               group =date,
               fill = capita_state))+
  expand_limits(x = states_map$long, y = states_map$lat)+
  labs(title = "Most Recent COVID-19 Cases in US per 10000 People (Cumulative)")+
  theme_map()+
  theme(legend.background = element_blank())
  transition_states(date)

anim_save("USmap_anim.gif")

From this map we can see that most of the United States 10,000 cases per capita increase at similar rates. This is interesting in comparison to hearing how California and New York were hit hard in the beginning yet they have relatively the same increase per capita as the rest of the United States.

Your first shiny app (for next week!)

NOT DUE THIS WEEK! If any of you want to work ahead, this will be on next week’s exercises.

8. This app will also use the COVID data. Make sure you load that data and all the libraries you need in the app.R file you create. Below, you will post a link to the app that you publish on shinyapps.io. You will create an app to compare states’ cumulative number of COVID cases over time. The x-axis will be number of days since 20+ cases and the y-axis will be cumulative cases on the log scale (scale_y_log10()). We use number of days since 20+ cases on the x-axis so we can make better comparisons of the curve trajectories. You will have an input box where the user can choose which states to compare (selectInput()) and have a submit button to click once the user has chosen all states they’re interested in comparing. The graph should display a different line for each state, with labels either on the graph or in a legend. Color can be used if needed.

GitHub link

9. Below, provide a link to your GitHub page with this set of Weekly Exercises. Specifically, if the name of the file is 05_exercises.Rmd, provide a link to the 05_exercises.md file, which is the one that will be most readable on GitHub. If that file isn’t very readable, then provide a link to your main GitHub page.

Weekly Exercise 5.

DID YOU REMEMBER TO UNCOMMENT THE OPTIONS AT THE TOP?